E15
Eaglerise SS Series 9W 200mA Constant Current Led Driver
Eaglerise SS Series 9W 200mA Constant Current Led Driver
SKU SKU:SS9200MXG
Stok rendah: 5 tinggal
Kongsi
Specification
Output
Constant Current 200mA 300mA 350mA 500mA 700mA
Voltage Range 27-45VDC 18-30VDC 15-26VDC 8.5-18VDC 7-13VDC
Unload voltage Max. 55VDC 40VDC 35VDC 28VDC 23VDC
Current Accuracy ±5%
Output HF current ripple(≥1KHz) ±5%
Output LF current ripple(≤120Hz) ±5%
SVM ≤0.4
Pst ≤1
Efficiency(Typ.) ≥81%@Full load,230V
Input
Rated input voltage 220-240VAC
Range of input voltage 176-264VAC
Frequency(Hz) 50/60 Hz
Displacement factor ≥0.7
Power Factor 0.5@Full load,230V
Input Current max 0.12A
Start-up time <0.5S
No Load Power ≤0.5W
Standby Power ≤0.5W
Network standby power ≤0.5W
Protection
Over Load Protection 103-120%
YES/Auto Resume
Over Voltage Protection >55VDC >40VDC >35VDC >28VDC >23VDC
YES/Auto Resume
Short circuit Protection YES/Auto Resume
Environment
Operating Temperature -20°C...+50°C
Humidity 20%-90%RH
Tc 85°C
80°CStorage Temperature -40°C~+60°C
Life time >50000h
Surface Dimension 55 x 41 x 21.5mm
standards EN 61347-1; EN61347-2-13; EN62384; EN61000-3-2 ; EN61000-3-3;EN 61547; EN 61000-4-2; EN 61000-4-5
Others ErP EU 2019/2020
RoHS RoHS (2011/65/EU) (EU)2015/863
Note
1.All parameters not specially mentioned are measured at 240VAC input , full load and 25°C of ambient temperature.
2.Ripple & Noise are measured at 20MHz of bandwidth by using a 300mm twisted pair-wire terminated with a 0.1uF & 47 uF
parallel capacitor.
3.Switch and dimmer are not recommended to connect between this product output and luminaries