Supermec Explosion Proof Plug

Technical Data Sheet

Data Sheet

Description

 SWE - SWAE - SCE - PE series explosion proof plugs and sockets are normally used in the chemical and petrochemical plants, offshore platforms, refineries and any other industries where hazardous atmospheres are potentially present.Plug and Socket configurations include 16A, 32A, 63A, 125A, with 3 Pole (3P), 4 Pole (4P) or 5 Pole (5P) options, and suitable for different Voltage requirements.

The materials used to manufacture the PLUGS & SOCKETS series have been studied to grant the maximum

protection against the highly corrosive agents present in these plants:

• the body in glass fiber reinforced polyester (GRP), provides a very high mechanical strength together with a good resistance against the UV ray effects;
• the gasket on cover grants an IP66 protection level ;
• the internal electrical components are fully sealed so as to prevent any corrosive action that could cause electrical faults;
• the wall type sockets SWE-SWAE series (all sizes) have two cable entries to allow a loop-in-loop-out installation.
• all the wall type sockets SWE-SWAE series are equipped, as standard, with one stopping plugs ATEX certified and with an internal brass connecting plate.
• the wall type SWE - SWAE series and coupler type sockets SCE series can be protected with a padlock to avoid unauthorized connections.