1
/
จาก
3
H11
PHILIPS HID-PV Medium Wattage Ballast x4PCs
PHILIPS HID-PV Medium Wattage Ballast x4PCs
SKU SKU:913700639480
ราคาปกติ
$ 1,120.00 SGD
ราคาปกติ
$ 1,120.00 SGD
ราคาโปรโมชัน
$ 1,120.00 SGD
ราคาต่อหน่วย
/
ต่อ
ค่าจัดส่งที่คำนวณในขั้นตอนการชำระเงิน
ไม่สามารถโหลดความพร้อมในการรับสินค้าด้วยตนเองได้
แบ่งปัน
General Information
Operating and Electrical
Wiring
System characteristics
Temperature
Controls and Dimming
Mechanical and Housing
Approval and Application
| Type Version |
-/mk1
|
| Lamp Type |
CDMe/CPO/CDM
|
| Number of Lamps |
1 piece/unit
|
| Suitable For Outdoor Use |
Yes
|
| Number of Products on MCB (16A Type B) (Nom) |
13
|
| Default Lamp Selected |
CDMe210
|
| Automatic Restart |
Yes
|
| Input Voltage |
208-240-277 V
|
| Input Frequency |
50 to 60 Hz
|
| Minimum Mains Voltage Operation (Min) |
172 V
|
| Operating Frequency (Nom) |
0.20 kHz
|
| Power Factor 100% Load (Nom) |
0.99
|
| Ignition Voltage (Max) |
5 kV
|
| Ignition Switch-Off Time (Max) |
20 min
|
| Mains Voltage Performance (AC) |
188-305V
|
| Mains Voltage Safety (AC) |
160-305V
|
| Power Factor 50% Load (Min) |
0.98
|
| Earth Leakage Current (Max) |
0.7 mA
|
| Output Peak Voltage (Max) |
250 V
|
| Inrush Current Width |
4 ms
|
| Lamp Power Tolerance |
-3%/+3%
|
| Input Current (Nom) |
1.11 A
|
| Inrush Current Peak (Max) |
4 A
|
| Cable Capacity Output Wires Mutual (Nom) |
1000 pF
|
| Cable Length From Device to Lamp |
3 m
|
| Wire Striplength |
10.0-11.0 mm
|
| Ballast Contact Wire Cross Section |
0.50-2.50 mm²
|
| Connector Type |
WAGO series 804
|
| Rated Ballast-Lamp Power |
210 W / 315 W
|
| Power Loss on CDMe/CPO While Dimming |
11 W
|
| Power Loss on CDMe/CPO |
18 W
|
| Lamp Power on CDMe/CPO |
210 W
|
| System Power on CDMe/CPO |
228 W
|
| Rated Lamp Power on CDMe/CPO |
210 W
|
| T-Ambient (Max) |
50 °C
|
| T-Ambient (Min) |
-30 °C
|
| T-Storage (Max) |
50 °C
|
| T-Storage (Min) |
-30 °C
|
| T-Case Lifetime (Nom) |
80 °C
|
| T-Case Switch Off (Min) |
92 °C
|
| Control Interface |
PROG
|
| Programmable Lamp Settings |
SON250/CDO250/CDMe250
|
| Pre-Set Integrated Controls |
Dali
|
| Programmable Dimming Options |
ALO/CLO/Dynadimmer/lineswitch/AmpDi
|
| Run-Up Time Before Dimming |
0 min
|
| Fade Down Rate |
0.7 %/sec
|
| Fade Up Rate |
7.9 %/sec
|
| Control Input Protection |
Yes (Basic insulation)
|
| Regulating Level |
37%-100%
|
| Housing |
C2
|
| Surge Protection (Common/Differential) |
EN61547 (L-L 2kV, L-G 4kV), 10 kV TIL
|
| IP Classification Luminaire |
34
|
| Active Temperature Protection |
Yes
|
| EMI 9 kHz ... 300 MHz |
CISPR 15 ed 7.2
|
| EMI 30 MHz ... 1000 MHz |
-
|
| Safety Standard |
IEC 607, 609, 926, 928 [ No Standard for HID Lamp drivers exists. Requirements in these standards to be used if considered relevant for the product.]
|
| Quality Standard |
ISO 9000:2000
|
| Environmental Standard |
ISO 14001
|
| Harmonic Current Emission Standard |
IEC 61000-3-2
|
| Vibration Standard |
IEC 68-2-6 Fc (10-150Hz, 2G)
|
| Bumps Standard |
IEC 68-2-29 Eb (10G/16ms)
|
| Humidity Standard |
EN 61347-2-12 clause 11
|
| Approval Marks |
F-Marking CE marking ENEC certificate VDE-EMV certificate |
| Hum And Noise Level |
37 dB(A)
|
