Nanhua Low Intensity Aviation Obstruction Light

Technical Details:

Datasheet_LS810

Datasheet_LS810D

**Ships from China - 2 to 3 weeks lead time**

Description for LS810 Low-Intensity Aviation Obstruction Light

Applications:

Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom,
GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light.

Main functions and features:
• Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as   required.
• Based on LED technology, low power consumption, and high efficiency.
• Lamp housing – Polycarbonate, with good anti-impact strength, thermal stability, high   transmittance.
• Die casting aluminum enclosure with powder-coat paint finishes, providing corrosion   resistance and durability.
• G3/4”pipe is available, ease of mount.
• EMC Compliance, No RF Radiation.
• Self-contained compartment, with stainless steel wire which is used to secure the unit   against falling in operation, and ease of mount.
• Built-in photocell can switch ON/OFF the light at dawn and dusk (optional).
• Steady burning or flashing type (no need external controller).
• Extremely Reliable – Major Maintenance Cost Saving.
• External two M20X1.5 Waterproof gland( can be customized).

Installation and operation:
• Check whether the supply voltage does comply with the rated voltage of thelamp.
• Insert the power cable through the bottom of lamp holder, and connect them to  the   terminals in the base respectively.
• Follow connection diagram and set up work model. (remark: dial switch ON---1, figure- --0)
• Tighten the screws between lamp housing and base.

Description for LS810D Low Intensity Dual Aviation Obstruction Light 

Application:

Applying to tower(power transportation, telecom, GSM), smokestacks (power
plant, coking plant, chemical plant), high buildings, bridge, harbor machinery,
construction machinery, wind turbine etc for aircraft warning. Apply for the
Obstacles lower than 45m.

Features:

• Aluminium alloy die-cast shell with electrostatic powder spray surface
treatment has good anti-vibration and corrosion resistance features.
• Red(yellow optional).
• Anti-UV and shock-resistant PC lamp cover.
• Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810.
• LED Light source, long lifetime, high efficiency and low power
consumption.
• Main-standby function, when main light is in failure, standby light will start
operation automatically. (Both lights operation at same time optional)
• Photocell control function(optional),photocell on/off level: 500lux
• G3/4”pipe is available for installation, easy for mounting.

Installation and Operation:

1.Please check the supply voltage does comply with rated voltage of the lamp.
2.Screw the lamp on G3/4” pipe of mounting bracket, which should be fixed on a smooth surface with
enough mechanical strength. Or you can select our mounting bracket: PJ024, PJ005. Note that
installation is fixed and reliable, so as not to fall.
3.If the lamp is with photocell, please do not put photocell direct to nearby light. Meanwhile ensure that the
photocell is not obstructed by nearby object.
4.Open the connection box and connect the power wire, signal wire according to marking. Then remount the
connection box. (For customized product please make object as standard.)