ข้ามไปยังข้อมูลสินค้า
1 จาก 2

E9L12

[China]EUCHIPS DLPE Series 1H 24V Non-Dimmable LED Constant Voltage Driver

[China]EUCHIPS DLPE Series 1H 24V Non-Dimmable LED Constant Voltage Driver

SKU SKU:107201550102

ราคาปกติ $ 21.40 SGD
ราคาปกติ $ 21.40 SGD ราคาโปรโมชัน $ 21.40 SGD
ลดราคา ขายหมดแล้ว
ค่าจัดส่งที่คำนวณในขั้นตอนการชำระเงิน
Power
Voltage

Request For Quote

***Ships from China - 2 to 3 weeks lead time***
Technical Details:

Data Sheet for DLPE60-1H24V

Data Sheet for DLPE120-1H24V

60W 24V Non-Dimmable LED Constant Voltage Driver DLPE60-1H24V

Input Voltage: 220-240VAC
Output Current: 2.5A
Output Voltage: 24VDC
Output Power: 60W
Ripple & Noise: 300mVp-p
Voltage Accuracy: ±5%
Frequency: 50/60Hz
Efficiency (Typical): 90%
Product Model: DLPE60- 1H24V

60W 24V Non-Dimming LED Constant Voltage Driver—— DLPE60-1H24VProduct Details

Features

● Single-channel constant voltage output
● Suitable for LED indoor lamps
● Small size, high efficiency, high reliability, long life;
● Works normally at -20℃~+50℃;

● Protection types: overload, overvoltage, short-circuit self-recovery protection;
● The typical efficiency of the whole machine is as high as 86%;
● Complies with CE certification and RoHS environmental protection standards;

● 100% full load aging test;

Technical Parameter

Model

DLPE60-1H24V

output  

aisle

1

Voltage

24VDC

current

2.5A

power

60W

Voltage accuracy

±5%

ripple

300mVp-p

enter

Voltage

220VAC-240VAC

current

0.31Amax@230VAC

efficiency

90%@230VAC, full load

frequency

50/60Hz

power factor

>0.9

Inrush current

Cold start 60A@220VAC, full load

Protect

 

short circuit

Automatic recovery

overvoltage

Automatic recovery

overcurrent

Automatic recovery

over temperature

Automatic recovery

other

size

211*40*32mm (length*width*height)

weight

225g

Operating temperature

- 20~50℃

Relative humidity

20~90% RH


Precautions

1. This product should be debugged and installed by qualified personnel.
2. This product is not waterproof and needs to be protected from the sun and rain. If it is installed outdoors, please use a waterproof box.
3. Good heat dissipation conditions will prolong the service life of the product. Please install the product in a well-ventilated environment.
4. Please check whether the output voltage and current of the LED power supply used meets the product requirements.
5. The diameter of the wire used must be enough to load the connected LED lamps, and ensure that the wiring is firm to prevent the wire from overheating or poor contact triggering an accident.
6. Before power-on debugging, make sure that all wiring is correct to avoid damage to the lamps due to wiring errors.
7. If there is a fault, please do not repair it yourself; if you have any questions, please contact the supplier.

120W 24V Non-Dimmable LED Constant Voltage Driver DLPE120-1H24V

Input Voltage: 220-240VAC
Output Current: 5A
Output Voltage: 24VDC
Output Power: 120W
Ripple & Noise: 300mVp-p
Voltage Accuracy: ±5%
Frequency: 50/60Hz
Efficiency (Typical): 88%
Product Model: DLPE120-1H24V

120W 24V Non-Dimming LED Constant Voltage Driver—— DLPE120-1H24VProduct Details

Features

● Single-channel constant voltage output
● Suitable for LED indoor lamps
● Small size, high efficiency, high reliability, long life;
● Works normally at -20℃~+50℃;

● Protection types: overload, overvoltage, short-circuit self-recovery protection;
● The typical efficiency of the whole machine is as high as 86%;
● Complies with CE certification and RoHS environmental protection standards;

● 100% full load aging test;

Technical Parameter

Model

DLPE120-1H24V

output  

aisle

1

Voltage

24VDC

current

5A

power

120W

Voltage accuracy

±5%

ripple

300mVp-p

enter

Voltage

220VAC-240VAC

current

0.62Amax@230VAC

efficiency

88%@230VAC, full load

frequency

50/60Hz

power factor

>0.9

Inrush current

Cold start 60A@220VAC, full load

Protect

 

short circuit

Automatic recovery

overvoltage

Automatic recovery

overcurrent

Automatic recovery

over temperature

Automatic recovery

other

size

79.5*40*32mm (L*W*H)

weight

440g

Operating temperature

- 20~50℃

Relative humidity

20~90% RH


Precautions

1. This product should be debugged and installed by qualified personnel.
2. This product is not waterproof and needs to be protected from the sun and rain. If it is installed outdoors, please use a waterproof box.
3. Good heat dissipation conditions will prolong the service life of the product. Please install the product in a well-ventilated environment.
4. Please check whether the output voltage and current of the LED power supply used meets the product requirements.
5. The diameter of the wire used must be enough to load the connected LED lamps, and ensure that the wiring is firm to prevent the wire from overheating or poor contact triggering an accident.
6. Before power-on debugging, make sure that all wiring is correct to avoid damage to the lamps due to wiring errors.
7. If there is a fault, please do not repair it yourself; if you have any questions, please contact the supplier.
ดูรายละเอียดทั้งหมด